Configure an ATA
you need a vcall user name & password for this service
You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and
dial: **** (four asterisks)
then dial: 110 #
and you will be told the IP address of your device (e.g. 192.168.0.100).
Go to any browser equipped computer on your network and enter the address:
(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.
Click on the “Admin Login” button near the top right side of the screen, then click on the “Line 1” tab.
You need to modify only a few parameters from the factory default. They are listed here:
|PROXY AND REGISTRATION|
|Use Outbound Proxy||YES
Register Expires: 300
|Display Name||Your Account No.|
|User ID||Your Account No.|
|Password||Your Account Password|
Click on the “Save Settings ” button at the bottom of the form.
ATA Wiring Video